NEC MultiSync ME501 - Table Top Stand Installation and Removal

English−18
Installing and Removing the Optional Table Top Stand
WARNING:  Please refer to “WARNING 8”.
CAUTION:  Please refer to “CAUTION 5”.
For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by
the manufacturer.
NOTE:  • ME431 use ST-43M. ME501 and ME551 use ST-401 or ST-43M. ME651 use ST-65M.
• For the ST-401 and ST-43M, ONLY use screws which are included with the optional table top stand.
For the ST-65M, ONLY use thumbscrews and attach the stand holders which are included with the optional table top
stand. Install the stand so the long end of the feet face forward.
• The monitor can only be used in the landscape orientation with the tabletop stand.
ME431 ST-43M (screws are included)
ME501
ME551
ST-401 or ST-43M (screws are included)
ME651 ST-65M (thumbscrews, screws, and stand holders are included)
ME651
Soft cloth
Optional table top stand
Table
Optional stand holder
ME431/ME501/ME551
200 mm (ME431)
400 mm (ME501/ME551)
400 mm
200 mm