English−32
Connecting a USB Device
USB storage device reader for use with the internal Media Player. See page 40.
Power supply port.
This port is for updating the firmware of the monitor via a USB storage device.
Imports or exports the monitor settings via the USB storage device when selecting [CLONE SETTING].
CAUTION: Pleaser refer to “CAUTION 2”.
NOTE: • Please make sure the connector shape and orientation is correctly aligned when connecting the USB device or
cable.
• Connecting a USB storage device with the monitor already powered on is not recommended. To prevent damage to
the monitor and possible corruption of the connected device’s data files, the monitor’s main power switch should be
off before making connections.
To Next Page
Loading...
Need help?
General