NEC NP-17CU01 - Page 41

41
3. Projection of Images (Basic Operation)
3-6. Turning on/off the light with the projector turned on
NOTE
The indicators on the control panel blink when the following operations are carried out. (See page 60)
• When you turn the light off
The LIGHT ON/OFF button indicator blinks green. The light cannot be turned on while the LIGHT ON/OFF but-
ton indicator is blinking.
If you operate the POWER button or LIGHT ON/OFF button while the indicators are blinking, the LCD screen
displays the warning screen below. The POWER button or LIGHT ON/OFF button becomes operable when the
amount of time remaining reaches 0.
3-6-1. Turning off the light
• PresstheLIGHTON/OFFbuttononthecontrolpanelforthreesecondsorlonger.
3-6-2. Turning on the light
• PresstheLIGHTON/OFFbuttononthecontrolpanelforthreesecondsorlonger.