42
3. Projection of Images (Basic Operation)
3-7. Turning your projector off
Press the POWER button on the projector control panel for three seconds or longer.
The light is turned off, the POWER button indicator blinks green, and the STATUS indicator blinks orange (cooling
state).
The fan will continue to rotate while cooling, and the amount of time remaining for cooling is displayed on the LCD
screen. The cooling-off time is 90 seconds.
When the cooling is finished, the POWER button indicator turns off and the status indicator lights orange (standby
state). KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30
seconds by default. Buttons on the control panel do not function while KEY LOCK is on. (See page 40)
Wait till the projector enters standby state before turning off the main power switch of the projector.
Chiller unit main power is turned off.
The POWER button indicator is turned off and the main power is turned off.
To Next Page
Loading...
