NEC NP-P350W - Adjusting the Vertical Position of a Projected Image (Lens Shift)

18
2. Projecting an Image (Basic Operation)
Adjusting the vertical position of a projected image (Lens shift)
Rotatethelensshiftdial.
Inthisuser’smanual,theupwardmaximumshiftisreferredtoas“normalposition”.
NOTE:
Thelensshiftdialcannotberotatedbeyondthemaximumupwardordownwardshift.Forciblyrotatingmaycausedamagetothe
projector.
TIP:
Lensshiftcanbeadjustedwiththerangebelow.Ifyouwishtomoveuptheimagehigherthanthislimit,usethetiltfootofthe
projector.
Desktop front projection
[P420X/P350X]
[P350W]
Downward
Upward
Lens shift dial
Height of projected
image
Height of projected
image
Vertical shift range (0 to 0.5V)
Vertical shift range (0 to 0.6V)