NEC NP-PE401H - Adjusting Projector Height

30
English ...
Installation
2
3
3
1
Adjusting the Projected Image
Adjusting the Height of Projector Image
The projector is equipped with tilt foot and rear feet to raise and
lower the image to ll the screen.
1. Press the tilt foot release. u
Raise or lower the image to the desired height angle, then
release the button to lock the tilt foot into position. v
2. Rotate the rear feet counter clockwise to raise the projector
or clockwise to lower it. w
2
1
3 3
By using the tilt
foot the projector can
be raised up to an
angle of 5 degrees.
Tilt foot
release button
Rear foot Tilt foot Rear foot