NEC Display Solutions of America, Inc.
PH1000U Installation Guide
Desktop and Ceiling Mount Rev 1.2
www.necdisplay.com PH1000U Page 1 of 12
Contents
Product Description, Lens Specs, Screen/Aspect Ratio
Notes and Formulas
Pg 1
Distance Charts and Formulas
Pg 1-2
Ceiling Mount/Desktop Installation
Pg 3-4
Lens Shift Adjustable Range
Pg 5
Cabinet Dimensions (Front, Top, Left, Right, Back)
Pg 6
Cabinet Dimensions (Bottom)
Pg 7
Optional Lens Dimensions
Pg 8-9
Ventilation Requirements
Pg 10
Input Panel and Button Panel
Pg 11
Control Codes
Pg 12
Product Description
Type: 3 chip DMD Reflection Type Dimensions: 25.7”(W) x 13.1”(H) x 27.6”(D)
0.96 in. 2x LVDS DMD
Weight: PH1000U: 87.1 lbs. / 39.5kg
Resolution: 1920 x 1200 (16:10) Brightness: PH1000U: 11,000 Lumens
Fan Noise: PH1000U: 43 dB / 39dB @ 1 meter
Power Consumption: PH1000U: 1008W (max) BTU’s: PH1000U: 3439.44 BTU/hour
Network Ready, integrated wired and wireless adapter
Powered: Horizontal & Vertical Lens Shift, Zoom, Focus
Lens Specifications
NP25FL: Throw Ratio: ~ 0.67:1 Focal Length: 11.2mm NP28ZL: Throw Ratio: 2.56 -4.16:1 Focal Length: 32.9 – 54.2mm
Screen Sizes: 80”-200” F/#: 1.85 Screen Sizes: 100-500” F/#: 1.86 – 2.48
NP26ZL: Throw Ratio: 1.39 - 1.87:1 Focal Length: 18.7 – 26.5mm NP29ZL: Throw Ratio: 4.16 – 6.96:1 Focal Length: 52.8 – 79.1mm
Screen Sizes: 100-500” F/#: 1.85-2.5 _________ Screen Sizes: 100-500” F/#: 1.85-2.41
NP27ZL: Throw Ratio: 1.87. – 2.56:1 Focal Length: 25.7 – 33.7mm
Screen Sizes: 100-500” F/#: 1.64 – 1.86
Screen/Aspect Ratio
4:3, 16:9 and 16:10 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table..
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
Formulas: 16:10 Aspect Ratio (PH1000U—WUXGA)
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3:
Projection Formulas: Definitions: 16:10 Screen Formulas
NP25FL: C = 0.707W – 3.714 W = Image Width W = H x 16/10
NP26ZL: C(Wide) = 1.395W – 4.332 ------ C(Tele) = 1.877W – 4.236 H = Image Height (size) H = W x 10/16
NP27ZL: C(Wide) = 1.883W – 4.039 ------ C(Tele) = 2.576W – 4.039 C = Throw distance Screen Diagonal = W x 18.868/16
NP28ZL: C(Wide) = 2.530W + 9.139 ------ C(Tele) = 4.112W + 8.808 16:9 Screen Formulas
NP29ZL: C(Wide) = 4.092W + 11.521 ------ C(Tele) = 6.850W + 11.437 W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16
To Next Page
Need help?
General
