NEC NP200 - Product Overview

Product Overview
To release the
remote control from the
projector gently press
down on the top of the
remote control above
the "Picture" button.
This will cause the
bottom of the remote
control to pop-up for
removal from the cabi- 1.
net. Be careful not to 2.
push any of the buttons 3.
on the remote control 4.
while removing it from
5.
the cabinet.
6.
7.
"-_" 8.
9.
Point the remote
control toward the
remote sensor.
(You can also point the
remote control toward
the ceiling when in the
front desk to bounce
the signal off the ceil-
ing.)
Projector
/
/
7
3
10
4
5
6
Power
Remote Control
Power (LED indicator)
Zoom and Focus Rings
Speaker
Lens
Lens Cap
Ventilation (inlet)
Ventilation (outlet)
10. Remote Sensor
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES