On Screen Display
The Projector has a multilinguaI On Screen Display that allows
you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source.
How to operate
1. To open the OSD, press "Menu" on the Remote Control.
2. When OSD is displayed, use ,_ _ keys to select any item in the
main menu. While making a selection on a particular page, press
Y key to enter sub menu.
3. Use A _r keys to select the desired item in the sub menu and
adjust the settings by *4 _ key.
4. If the setting has _ icon, you could press "Enter" to enter another
sub menu. Press "Menu" to close the sub menu after adjustment.
5. After adjusting the settings, press "Menu" go back to the main
menu.
6.
To exit, press "Menu"again. The OSD will be closed and the projec-
tor will automatically save the new settings.
Main Menu
If no button operation
is made for 30 seconds,
the OSD will be closed
automatically.
Sub Menu Setting
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES
To Next Page
Loading...
