Replacing the lamp
(optional lamp NPIOLP)
The projector will detect the lamp life at 3400 hours in Normal
mode. When the "Power" LED indicator flashes red and the
message below displays on-screen, the projector has detected
that the lamp is approaching its end of life. (Use the same ex-
planations on page 14) It will show you a warning message
Warning: To avoid When you see this message, change the lamp as soon as pos-
burns, allow the projec-sible. Make sure the projector has been cooled down for at
tor tocool for at least least 60 minutes before changing the lamp.
60 minutes before you
replace the lamp!
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES
To Next Page
Loading...
