5 Keystone Adjusttheimagetocompensate
Correction fordistortioncausedbytilt-
ingtheprojector(vertical_+40
degrees).
6 Source Press"Source"tochooseRGB,
Component,S-Video,Composite
andHDTVsources.
7 Menu Press"Menu"tolaunchthe
Onscreen display (OSD), back to
the top level of OSD for the OSD
main menu operation
8 AV-Mute Momentarily turn off/on the
audio and video.
9 Reset Change the adjustments and set-
tings to the factory default value.
10 Video Source Press "Video" to choose Video
connector.
11 S-Video Source Press "S-Video" to choose S-
Video connector.
12 Magnify Zoom the projector display in or
out. Use "Magnify", not 4 or
13 Enter Confirm your section of items in
sub menu operation.
14 Auto Adjust Automatically synchronize the
projector to the input source.
15 Four Use A or Y or 4 or _ to select
Directional items or make adjustments to
Select Keys your selection.
16 Source Lock Press "Source Lock" to lock
specified connection port; press
this again to unlock.
17 Volume +/- Increase/decrease speaker vol-
ume.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES
To Next Page
Loading...
