Clock
"Clock" changes the display data frequency to match the frequency
of your computer's graphic card. If you experience a vertical flicker-
ing bar, use this function to make an adjustment.
Phase
Synchronize the signal timing of the projector with the graphics
card. If you experience an unstable or flickering image, use this
function to correct it.
White Peaking
Use the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger image, adjust towards the
maximum setting. For a smooth and more natural image, adjust
towards the minimum setting.
Color Tem_
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
CalTllTla
This allows you to choose a gamma table that has been fine-tuned to
bring out the best image quality for the input.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES
To Next Page
Loading...
