Color
Adjust a video imge from black and white to fully saturated color.
Press the _ to decrease the amount of color in the image.
Press the _ to increase the amount of color in the image.
Hue
Adjust the color balance of red and green.
Press the _ to increase the amount of green in the image.
Press the _ to increase the amount of red in the image.
Sharpness
Adjust the sharpness of the image.
Press the _ to decrease the sharpness.
Press the _ to increase the sharpness.
White Peaking
Use the wl_te peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger image, adjust towards the
maximum setting. For a smooth and more natural image, adjust
towards the mix_dmum setting.
Color Temp.
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
Gamma
This allows you to choose a gamma table that has been fine-tuned to
bring out the best image quality for the input.
THE TRUSTED SOURCE FOR PROJECTOR LAMPS AND ACCESSORIES
To Next Page
Loading...
