NEC P350W - Page 196

178
8. User Supportware
• Operation on computer
1 ClickWindows[Start]→[AllPrograms]→[NECProjectorUserSupportware]→[DesktopControlUtility
1.0]→[DesktopControl],inthatorder.
 The“SelectionOfNetworkConnections”windowisdisplayed.
 Thisdisplaysalistofthenetworkdevicesconnectedtothecomputeryouareusing.
2 Selectthenetworkdevicetouseandclick[OK].
The “Startup password settings” window will be displayed.
• IncaseofWindows7/WindowsVista,theUserAccountControlWindowisdisplayed.Click[OK]orinputthe
administrator password.
ScreenwhenDesktopControlUtility1.0isstartedrsttime
already
Screen if starting password has been set
IMPORTANT:
• Besuretowritedownthestartingpasswordincaseyouforgetit.
• ThestartingpasswordmustbeinputeachtimeDesktopControlUtility1.0isstarted.
• Shouldyouforgetthestartingpassword,reinstalltheDesktopControlUtility1.0.
AscreenliketheonebelowisdisplayedwhenthesoftwareisstartedonaPCinstalledwithWindowsXPServicePack2(SP2)(or
later).
Click“Unblock”ifthisisdisplayed.