NEC PA500U - Page 199

187
8. User Supportware
•Operationoncomputer
1 ClickWindows[Start]→[AllPrograms]→[NECProjectorUserSupportware]→[DesktopControlUtility
1.0]→[DesktopControl],inthatorder.
The “Selection Of Network Connections” window is displayed.
This displays a list of the network devices connected to the computer you are using.
2 Selectthenetworkdevicetouseandclick[OK].
The “Startup password settings” window will be displayed.
• IncaseofWindows7/WindowsVista,theUserAccountControlWindowisdisplayed.Click[OK]orinputthe
administrator password.
Screen when Desktop Control Utility 1.0 is started first time
already
Screen if starting password has been set
IMPORTANT:
• Besuretowritedownthestartingpasswordincaseyouforgetit.
• ThestartingpasswordmustbeinputeachtimeDesktopControlUtility1.0isstarted.
• Shouldyouforgetthestartingpassword,reinstalltheDesktopControlUtility1.0.
AscreenliketheonebelowisdisplayedwhenthesoftwareisstartedonaPCinstalledwithWindowsXPServicePack2(SP2)(or
later).
Click“Unblock”ifthisisdisplayed.