NEC PA500U - Page 200

188
8. User Supportware
3 InputthestartingpasswordofDesktopControlUtility1.0,andclick[OK].
The “Current password” window will be displayed.
NOTE:
ThecharacterstringdisplayedinthepasswordeldvarieseachtimeDesktopControlUtility1.0isstarted.
4 Writedownthecharacterstringdisplayedinthepasswordeld.
Write down “PMHN” in the screen example of step 3.
5 Click[OK].
Desktop Control Utility 1.0 will be started.
Move to the room where the projector is installed, with the paper on which you have written down the password in
step 4.