NEC PA500U - 9. Appendix

189
8. User Supportware
•Operatingtheprojector(connectingcomputer)
1 ConnectaUSBmousethatiscommerciallyavailabletotheprojector.
USB
2 Turnonthepowertotheprojector.
Set the LAN setting of the projector in advance.
3 PresstheSOURCEbuttonontheprojectorunit.
The Source list will be displayed.
In case of the remote control, press the NETWORK button.
The “network menu” screen will be displayed, proceed to step 5.
4 Press the /buttonstoselect[NETWORK],andthenpresstheENTERbutton.
The “network menu” screen will be displayed.