NEC PA723U - Page 145

To Next Page

To Previous Page

131

5. Using On-Screen Menu

[HDBaseT OUT SELECT]

SelectsignaltooutputfromtheHDBaseTOUT/Ethernetportontheprojector.Whentwoimagesareprojectedsimul-

taneously(PIP/PICTUREBYPICTURE),theimageforthemainscreenisoutput.

AUTO �� Output the input signal� When [PIP] has been set, the input signal for the main screen is output�

HDMI1 �� Output the input signal thru the HDMI1 input terminal�

HDMI2 �� Output the input signal thru the HDMI2 input terminal�

DisplayPort �� Output the input signal thru the DisplayPort IN terminal�

HDBaseT �� Output the input signal thru the HDBaseT IN/Ethernet port�

NOTE:

• SignalthrutheCOMPUTERinputterminalcannotbeoutput.Inthestate[PIP]or[PICTUREBYPICTURE]hasbeensetand

[AUTO]hasbeensetforthisfunction,moreover,theinputterminalforthemainscreenistheCOMPUTERandtheinputterminal

forthesubscreenisoneamongtheHDMI1IN,HDMI2IN,DisplayPortINterminals,orHDBaseTIN/Ethernetport,thesignalfrom

the sub screen will be output.

• Ifthesetinputterminalsformainandsubscreenfor[PIP]and[PICTUREBYPICTURE]aredifferedfromtheselectedinput

terminals, any image will be output.

• 4K60pand4K50psignalscannotbeoutput.

[EDIDVERSION]

SwitchtheEDIDversionfortheHDMI1INandHDMI2INterminals.

MODE1 �� Supports general signal

MODE2

�� Supports 4K signal

Select this mode for displaying 4K image using the device supporting 4K

NOTE:

Ifimageandsoundcannotbeoutputin[MODE2],switchto[MODE1].

[HDCPVERSION]

SwitchtheHDCPversionfortheHDMI1INandHDMI2INterminals.SelectHDCP2.2forgeneralsignal.

HDCP2�2 �� Automatically switch the mode HDCP2�2 and HDCP1�4

HDCP1�4 �� Forcedly perform transmission with HDCP1�4

NOTE:

• IfimageandsoundcannotbeoutputfromthemonitorconnectedwiththeHDBaseTOUT/Ethernetport,switchtheHDCPversion

toHDCP1.4.

Related product manuals