NEC PA723U - Menu Position Control; Geometric Correction

41
3. Convenient Features
③ Select[EXIT]displayedatthebottomofthemenubyleftclickfor
goingbacktothepreviouslevel.Ifthecursorisonthemainmenu
option,itworksforclosingthemenu.(Itworksasthesameperfor-
mancewiththe[EXIT]buttonontheremotecontrol.
Menu position control
① Clickthe wheel buttontodisplaytheon-screenmenuindication
frame.
②
 Leftclickatthepositionontheprojectionscreenwhereyouwant
toshifttheon-screenmenu.Thenearestcorneroftheon-screen
menuindicationframewillshifttotheclickedposition.
③ Clickthewheelbuttontoclosethemenuindicationframe.
Geometric correction
TheUSBmousecanbeusedforCORNERSTONECORRECTION,HORIZONTALCORNER,VERTICALCORNER
andWARP.Inthisclause,theCORNERSTONECORRECTIONbyanUSBmouseisexplainedasanexample.
① WhiletheadjustmentscreenoftheCORNERSTONE
CORRECTION is displayed, right click on the pro-
jection screen.The shape of mouse pointerwill be
changedandthecorrectionwillbecomeavailable.