NEC PE506UL - 016. Power off ]

To Next Page

To Previous Page

©NEC Display Solutions, Ltd. 2014-2020 16

3.3 [ 016. POWER OFF ]

Turns off the power of the projector.

Information

While this command is turning off the power (including the cooling time), no other command can be accepted.

Command

02h 01h 00h 00h 00h 03h

Response

 When the command succeeds

22h 01h <ID1> <ID2> 00h <CKS>

 When the command fails

A2h 01h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>

Main Page

Projector Control Command Reference Manual1
Introduction2
Table of Contents3
Contents3
Connecting an External Device5
Connection Interface5
Communication Conditions7
Command List8
Understanding Command Details10
Parameters10
Responses11
Error Code List12
Command Details13
009. Error Status Request ]13
015. Power on ]15
016. Power off ]16
018. Input Sw Change ]17
020. Picture Mute on ]19
021. Picture Mute off ]20
022. Sound Mute on ]21
023. Sound Mute off ]22
024. Onscreen Mute on ]23
025. Onscreen Mute off ]24
030-1. Picture Adjust ]25
030-2. Volume Adjust ]27
030-12. Aspect Adjust ]29
030-15. Other Adjust ]30
037. Information Request ]32
037-3. Filter Usage Information Request ]33
037-4. Lamp Information Request 3 ]34
037-6. Carbon Savings Information Request ]36
050. Remote Key Code ]38
051. Shutter Close ]40
052. Shutter Open ]41
053. Lens Control ]42
053-1. Lens Control Request ]44
053-2. Lens Control 2 ]46
053-3. Lens Memory Control ]48
053-4. Reference Lens Memory Control ]50
053-5. Lens Memory Option Request ]52
053-6. Lens Memory Option Set ]53
053-7. Lens Information Request ]55
053-10. Lens Profile Set ]56
053-11. Lens Profile Request ]57
060-1. Gain Parameter Request 3 ]58
078-1. Setting Request ]60
078-2. Running Status Request ]61
078-3. Input Status Request ]62
078-4. Mute Status Request ]64
078-5. Model Name Request ]66
078-6. Cover Status Request ]67
079. Freeze Control ]68
084. Information String Request ]69
097-8. Eco Mode Request ]70
097-45. Lan Projector Name Request ]71
097-155. Lan Mac Address Status Request2 ]72
097-198. Pip/Picture by Picture Request ]73
097-243-1. Edge Blending Mode Request ]75
098-8. Eco Mode Set ]76
098-45. Lan Projector Name Set ]77
098-198. Pip/Picture by Picture Set ]78
098-243-1. Edge Blending Mode Set ]80
305-1. Base Model Type Request ]81
305-2. Serial Number Request ]82
305-3. Basic Information Request ]83
319-10. Audio Select Set ]85
Revision History87

NEC PE506UL - 016. Power off ]

Table of Contents

Other manuals for NEC PE506UL

Related product manuals