PlasmaSync™ 42VP4/42VP4D Supplement Sheet
Page Correction
(Introduction)
Contents of the Package
Page 24
(Information)
OSM ANGLE settings
Page 37
(Information)
PLE LINK settings
The cable clamps come attached to the back of the monitor.
The portrait display format can be set irrespective of the ON or OFF of Advanced
OSM.
The PLE LINK can be set in a 3ⴒ3 video wall also.
REMOTE
IN
REMOTE
IN
REMOTE
OUT
REMOTE
OUT
REMOTE
IN
REMOTE
OUT
REMOTE
OUT
REMOTE
IN
No.1
No.2
No.3No.4
No.1
No.2
No.3No.4
No.1
No.2
No.3No.4
No.1
No.2
No.3No.4
Display 1
Display 2
Display 4
Display 3
Printed in Japan
7S820221
* Connect the remote control cable between Display 1 and Display 4.
* With the 3ⴒ3 video wall, connect the final display to the first display the same
way as with 2ⴒ2 video wall.
3-115
CONFIDENTIAL
To Next Page
Loading...
