NEC PlasmaSync 61XM1A User Manual

4
Rear View/ Terminal Board
A AC IN
Connect the included power cord here.
B EXT SPEAKER L and R
Connect speakers here. Maintain the correct polarity.
C EXTERNAL CONTROL
This terminal is used when power ON/OFF, input
selection and AUDIO MUTE and other controls are
operated externally (by external control). See also page
39 for external control.
D REMOTE CONTROL
Connect the supplied remote cable here.
E CONTROL LOCK
When “CONTROL LOCK” is set “ON”, the buttons
on the set’s control panel do not function.
F VIDEO1, 2, 3
Connect VCR’s, DVD’s or Laser Discs, etc. here.
G AUDIO1, AUDIO2, AUDIO3
These are audio input terminals.
The input is selectable. Set which video image to allot
them to on the menu screen.
H DVD1 / HD1
Connect DVD’s, High Definition or Laser Discs, etc.
here.
I RGB1
Inputs the analog RGB signal of personal computer,
etc.
J RGB2/ DVD2/ HD2
RGB2: Inputs the analog RGB signal.
DVD2/ HD2: Connect DVD’s, High Definition or
Laser Discs, etc. here.
K RGB3
(DVI 29pin)
Inputs a digital RGB signal (TMDS).
L Handy-Grip recess
Use the recesses (as shown) when you need to carry
the display.
EXTERNAL
CONTROL
REMOTE
CONTROL
CONTROL
LOCK
ON/ OFF
SPEAKERS MUST HAVE
MORE THAN 7WATT RATING
IMPEDANCE 6 OHM
RIGHT LEFT
AC IN
RGB 3
(
Digital RGB
)
RGB 1
R/C
R/PR
L
(
MONO
)
VIDEO 1
G/Y
HD
VD
R
VIDEO 2
VIDEO 3
Y
C
B/PB
L
(
MONO
)
R
L
(
MONO
)
R
CR/PR
B/CB/PB
AUDIO 2 DVD1/ HD1AUDIO 3 AUDIO 1RGB2/DVD2 /HD2
RGB 3
(
Digital RGB
)
RGB 1
R/C
R/PR
L
(
MONO
)
VIDEO 1
G/Y
HD
VD
R
VIDEO 2
VIDEO 3
Y
C
B/PB
L
(
MONO
)
R
L
(
MONO
)
R
CR/PR
B/CB/PB
AUDIO 2 DVD1/HD1AUDIO 3 AUDIO 1RGB2/DVD2 / HD2
SPEAKERS MUST HAVE
MORE THAN 7WATT RATING
IMPEDANCE 6 OHM
RIGHT LEFT
A
L
BCDE
EXTERNAL
CONTROL
REMOTE
CONTROL
CONTROL
LOCK
ON / OFF
AC IN
F
G
H
I
K
J

NEC PlasmaSync 61XM1A Specifications

General

Brand	NEC
Model	PlasmaSync 61XM1A
Category	Monitor
Language	English