NEC PX750U - Removing the Lens

155
4.Turnthelensclockwise.
Turn until a click is heard.
The lens is now fastened onto the projector.
TIP:Mountingthelenstheftpreventionscrew
Fastenthelenstheftpreventionscrewincludedwiththeprojectortothe
bottomoftheprojectorsothatthelenscannotberemovedeasily.
Removing the lens
Before removing the lens:
1. Turnontheprojectoranddisplayanimage.(→page16)
2. PressandholdtheSHUTTER/HOMEPOSITIONbuttonfor2seconds.
The lens position will be moved to the home position.
3. Turnofftheprojector,turnoffthemainpowerswitch,andthenunplugthepowercord.
4. Waituntiltheprojectorcabinetiscoolenoughtohandle.
1. Whilepressingthelensreleasebuttonontheprojector’s
frontpanelfullyin,turnthelenscounterclockwise.
The lens comes off.
NOTE: If the lens cannot be removed when the lens release (PUSH
RELEASE LENS) button is pressed, check whether the lens theft
preventionscrewismounted.
2. Slowlypullthelensofftheprojector.
- After removing the lens, mount the lens caps (front and
back) included with the lens before storing the lens.
- Ifnolensisgoingtobemountedontheprojector,mount
the dust cap included with the projector.