NEC PX750U - Page 179

165
6. Installation and Connections
1. Pressthe buttontosettheprojectortothestandbymode,then
turnoffthemainpowerswitch.
2. Removetheplate(portcover).
Loosen the screw security port cover.
• Thescrewisnotremovable.
3. SlowlyinsertthewirelessLANunitintotheUSB(LAN)port.
- Remove the wireless LAN unit’s cap, set the unit with the front (the
side with the indicator) facing upwards, hold the back edge and
insert the unit gently.
Next, press the wireless LAN unit in with a finger.
- The cap you have removed will be used when the wireless LAN unit
is removed, so store it in a safe place.
NOTE:IfthewirelessLANunitishardtoinsert,donotpushitinbyforce.
4. Attachtheanti-theftcapforwirelessLANunit.
Use the screw you removed at Step 2 to secure the anti-theft cap.
Plate