– 6 –
CHAPTER 1 INTRODUCTION
Note 1: Telephony Server has two parts of processors on its CPU, TP and SP. For the information about it, refer
to “STRUCTURE OF TELEPHONY SERVER”.
Note 2: MG(PRI) in Proprietary Protocol mode uses LAN1 as the registration destination while uses LAN2 as
the signaling control port. LAN interface for the signaling control port, however, can be changed to LAN1
by ADTM command.
Note 3: “SIP terminal” excludes WLAN Handset (MH Series) here.
To Next Page
Loading...
