PL- 3
PRODUCT LIABILITY
DANGER
Do not attempt to repair or move the main power source without assistance from the dealer.
Do not put any metal or combustible objects into a vent of the system, the main power source, or
any peripheral equipment. Operating the system in this state might cause a fire, an electrical shock,
or a system failure. If this occurs, turn off the power and contact the dealer.
Be careful when using any peripheral equipment’s Liquid Crystal Display (LCD). If the liquid
leaks, it can be harmful to the user and to the system.
Before connecting any non-NEC, customer-provided equipment, check with the supplier to ensure
that the equipment is compatible. If the supplier cannot confirm the compatibility, do not connect
the equipment. Connecting incompatible equipment might cause a fire or an electrical shock.
WARNING
Do not place any object on the system or the main power source. If the object falls, it might cause
personal injury or damage to the equipment.
When removing a plug from an outlet, be sure to grip the plug, not the cord. Gripping the cord to
remove the plug could cause a fire or an electrical shock to occur.
If lightning causes a fault, contact the dealer.
Provide the appropriate temperature, humidity, and ventilation on an around-the-clock basis. For
example, at a height that is one meter (3.28 feet) above the floor, the temperature should be between
20° C and 25° C (68° F to 77° F) and the humidity should be approximately 50%.
To Next Page
Loading...
