– 75 –
CHAPTER 4 OFFICE DATA DESIGN
STEP 6: ACDPLT - Assign the schedule number (1-250) to “WEEKNO” for each pilot number.
M_NO: Monitor Number
CCV/W: 1 = Week Schedule
WEEKNO: Schedule Number (1-250) Note6
Example:
M_NO: 2000 M_NO:2100
CCV/W:1 CCV/W:1
WEEKNO:1 WEEKNO: 100
Note 1: The same Week day Schedule number (SCH) cannot be set to a different Tenant number (TN).
Note 2: Monday’s table starts from “00:02”. Others start from “00:00”.
Note 3: Schedule Number for the holiday is related to Schedule Number for the holiday assigned by ACDHSE.
Note 4: When assigning SCH = “0”, ACDWS becomes effective. This means that WEEK of ACDWS related to
WEEKNO assigned by ACDPLT will be used.
Note 5: Schedule Number for the holiday is related to Schedule Number for the holiday assigned by ACDHCE.
Note 6: Schedule Number is related to SCH assigned by ACDWS and is related to WEEKNO assigned by ADDHC.
When assigning the data, consideration should be given to the whole schedule. The following examples show
the relationship between each command.
To Next Page
Loading...
