!
!
3.5 SIP System Information Setup
Values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 7 SIP System Information Setup
10-28-1 : SIP System Information Setup – Domain Name
Define the Domain name up to 64 characters. This information is specific to your
market and is provided by your SIP Trunking Service Provider.
.
When configuring Domain name, the SIP service provider will supply the
Proxy/Domain in the following manner - "Host Name" . "Domain Name" . The
characters are normally separated by “.” The characters after “.” will be in the
Domain Name.
10-28-2 : SIP System Information Setup – Host Name
Define the Host name, up to 48 characters.
.
When configuring Host name, the SIP service provider will supply the Proxy/Domain in
the following manner - "Host Name" . "Domain Name" . The characters are normally
separated by “.” The characters before “.” will be in the Domain Name.
10-28-3 : SIP System Information Setup – Transport Protocol
Define the Transport type. This option is always set to 0 (UDP).
10-28-5 : SIP System Information Setup – Domain Assignment
Determine the type of Domain Assignment. Set this entry to 1 (Domain Name).
10-28-6 : SIP System Information Setup – IP Trunk Port Binding
Set this entry to 0 (Disable) to allow an incoming call to use the lowest port.
To Next Page
Loading...
