!
!
3.10 Class of Service Options (Outgoing Call Service)
Values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 11 Class of Service Options (Outgoing Call Service)
20-08-13 : Class of Service Options (Outgoing Call Service) – ISDN Clip
This needs to be turned ON per COS, if you are trying to send any information on
a per station basis. If turned OFF, it will still send the trunk information if set.
20-09-02: Class of Service Options (Incoming Call Service) Caller ID Display
This needs to be turned ON per COS, if you want to receive caller ID.
To Next Page
Loading...
