!
!
3.15 ToS Setup
Values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 16 ToS Setup
84-10-01 : ToS Setup – ToS Mode
For the RTP/RTCP (Protocol type 5) and SIP Trunk (Protocol type 9), set the ToS
Mode to “2” (Diffserv).
The SV9100 must be reset in order for the change to take effect.
84-10-07 : ToS Setup – Priority (Diffserv)
For each of the following protocol types, set the following priorities:
RTP/RTCP (Protocol type 5): Priority 40.
SIP Trunk (Protocol type 9): Priority 46.
The SV9100 must be reset in order for the change to take effect.
To Next Page
Loading...
