CHAPTER 2 MIGRATION PROCEDURE
CHAPTER 2 MIGRATION PROCEDURE
This chapter explains the migration procedure for SV8300 Unit Configuration and also describes the
procedure to migrate the system data for System Speed Dialing (300 memories).
* The Required Time indicated for each migration procedure is estimated.
For Single Unit Configuration
Start
Open SV8300 PCPro and connect to the SV8300. [Required Time: About 1 minute]
From the system menu select System Data Save/Load/Verify. Then click Save and select All system data +
All service memory + Registration data by MAC authentication + DBM data (SRAM) to save all system data
in SV8300. (See the SV8300 PC Programming Manual.)
[Required Time: About 15 minutes]
Is billing information stored?
Collect the billing information using SMDR.
[Required Time: About 20 minutes]
- 7 -
To Next Page
Loading...
