CHAPTER 2 MIGRATION PROCEDURE
Procedure to Load Voice Data from CF
Memory
Start
Set the CPU to off-line mode.
[Procedure to set off-line mode]
(1) Set the SENSE switch on the CPU blade to “E” or “F”.
(2) Push the RESET switch on the CPU blade.
NOTE: Be sure to set the system to off-line mode before loading the voice data.
On the [System Data/Save/Load/Verify] menu of the SV9300 PCPro, load the voice data
onto the CPU built-in memory (flash ROM).
NOTE 1: All messages in VRS channels 0-15 are overwritten.
NOTE 2: After loading the voice data, it is automatically backed up to the flash ROM
End
- 18 -
To Next Page
Loading...
