NEC Univerge SV9300 - Required Equipment

CHAPTER 1 OUTLINE
Required Equipment
The required equipment for the migration is shown in the table below.
Other equipment is available for SV9300 with a few exceptions. For details, see (12) in ‘Migration
Conditions’. Page 5
Equipment Description Remarks
CHS1UG(S)-xx NOTE 1
CPU Chassis
For SV9300
CHS2UG(D)-xx NOTE 1
Dual CPU Chassis
For SV9300
CC-CP10-A NOTE 1
CPU Blade
For SV9300
－
SV9300 Software Licenses NOTE 2
Several SV9300 Licenses are required
depending on the office conditions.
SV93 PC-PRO
Maintenance Tool (PCPro) for
SV9300
Necessary not only to convert the
system data but also to set SV9300
system data after the conversion.
SV83 PC-PRO
Maintenance Tool (PCPro) for
SV8300
Necessary to store the SV8300 system
data before converting it to SV9300.
NOTE 1: For preventive maintenance of the power supply, replacing the SV8300 chassis with SV9300 chassis is
recommended.
NOTE 2: For the migration of SV8300 TDM blades the Hardware Migration License is required.
- 2 -