NEC V332X - Connecting Video Input Sources

27
... English
Installation
Due to the
difference in
applications for each
country, some regions
may have different
accessories.
When Deep Color
is set to ON on your
HDMI equipment,
video or audio noise
may be generated
depending on the
equipment or cable
being used. Should
this happen, set Deep
Color to OFF (8 bit).
Connect to Video Sources
Make sure that the
power plug is fully
inserted into both the
projector AC IN termi-
nal and the wall outlet.
1.............................................................................................Power cord (supplied)
2............................................................................................................. HDMI cable*
3....................................................15-Pin to 3 RCA Component/HDTV Adaptor
4......................................................................................................................... Audio
5...................................................................................................Audio Cable/RCA
6...................................................................................................Audio Cable/RCA
7............................................................................................ Composite video cable
*HDMI cable: Use High Speed HDMI
®
Cable.
To the wall outlet
E62405SP
R
1
3
4 5
2
6
Audio Output
7
8
External
Display
Router / Network Switch
NP-V302X, NP-V302W
To the wall outlet
E62405SP
R
Composite Video Output
DVD Player, Set-top Box,
HDTV receiver
1
5
6
Audio Output
4
32
7
NP-V332X, NP-V332W, NP-V302H