56
English ...
User Controls
SCREENIMAGE SETTING OPTIONS
GENERAL SIGNAL
PHASE
CLOCK
H. POSITION
V. POSITION
COMPUTER
SELECT EXIT MOVE MOVE
ADVANCED
PHASE
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or ickers, use this function to
correct it.
PHASE
EXIT
ADJUST
EXIT
CLOCK
Change the display data frequency to match the frequency of
your computer’s graphic card. Use this function only if the image
appears to icker vertically.
CLOCK
EXIT
ADJUST
EXIT
“SIGNAL” is
only supported in
Analog VGA (RGB)
signal.
SETTING |
SIGNAL
To Next Page
Loading...
