NEC V332X - Projector LED Indicator Meanings

81
... English
Appendices
Problem: LED Indicator message
POWER LED Indicator
Indicator Condition Projector Condition Note
Off The main power is off. Without connecting
power cable.
Blinking
light
GREEN 0.5sec ON / 0.5sec OFF The projector is getting
ready to turn on.
--
GREEN 2.5sec ON / 0.5sec OFF Off Timer is working. --
ORANGE 0.5sec ON / 0.5sec OFF Cooling --
Steady
light
GREEN Power on mode --
ORANGE Network Standby mode Connecting power cable.
RED Normal Standby mode Connecting power cable.
STATUS LED Indicator
Indicator Condition Projector Condition Note
Off Normal Condition --
Blinking
light
RED 2cycle
(0.5sec ON / 0.5sec OFF)
Temperature error
--
3cycle
(0.5sec ON / 0.5sec OFF)
Power error
Power unit is not
working properly.
Contact your dealer.
4cycle
(0.5sec ON / 0.5sec OFF)
Fan error
--
6cycle
(0.5sec ON / 0.5sec OFF)
Lamp error
--
GREEN 0.5sec ON / 0.5sec OFF Re-ring the lamp
(The projector is cooling
down)
--
Steady
light
ORANGE Control Panel Lock is
working
You have pressed
cabinet button when
Control Panel Lock is on.
CONTROL ID error Remote control ID and
projector ID are not
matched.