NEC VE303 - Control Panel Button Functions

9
... English
Introduction
7 POWER Turn the projector on/off. Please
see the “Power On/Off the
Projector” section on pages 26-27.
8 EXIT Press to exit the OSD menu.
9 SOURCE Press “SOURCE” to select an
input signal.
10 MENU Press “MENU” to launch the
Onscreen display (OSD), back to
the top level of OSD for the OSD
main menu operation.
11 KEYSTONE
Correction
Adjust the image to compensate
for distortion caused by tilting the
projector (vertical ± 40 degrees).
12 ENTER Conrm your section of items in
sub menu operation.