33
... English
User Controls
The Projector has a multilingual On Screen Display that
allows you to make image adjustments and change a variety of
settings.
How to operate
1. To open the OSD, press the MENU button on the remote control.
2. When OSD is displayed, use the buttons to select any item
in the main menu. While making a selection on a particular page,
press the button to enter sub menu.
3. Use the buttons to select the desired item in the sub menu
and adjust the settings by using the button.
4. Select the desired item in the sub menu and press the ENTER
button to enter another sub menu. Press the MENU button to close
the sub menu after adjustment.
5. After adjusting the settings, press the MENU or EXIT button go
back to the main menu.
6. To exit, press the MENU button again. The OSD will be closed and
the projector will automatically save the new settings.
On Screen Display
If no button
operation is made for 30
seconds, the OSD will be
closed automatically.
SCREENIMAGE SETTINGS OPTIONS
GENERAL ADVANCED
GAMMA
BrilliantColor™
COLOR TEMP.
DYNAMIC CONTRAST
COLOR
COLOR SPACE
FILM
LOW
COMPUTER
SELECT EXIT MOVE MOVE
OFF
AUTO
Main Menu
Sub Menu Setting
To Next Page
Loading...
