2
English ...
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user’s guide to maximize the life of your
unit.
■ Warning-
This projector will detect the life of the lamp
itself. Please be sure to change the lamp when it
shows warning messages.
■ Warning-
Reset the “CLEAR LAMP HOURS” function
from the on-screen display “OPTIONS
|LAMP SETTINGS” menu after replacing the
lamp module. Please see page 61.
■ Warning-
When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power.
■ Warning-
Turn on the projector rst and then the signal
sources.
■ Warning-
When the lamp reaches the end of its life, it will
burn out and may make a loud popping sound.
If this happens, the projector will not turn back
on until the lamp module has been replaced. To
replace the lamp, follow the procedures listed
under “Replacing the Lamp”.
Turkish RoHS information relevant for Turkish market
EEE Yönetmeliğine Uygundur.
This device is not intended for use in the direct eld of
view at visual display workplaces. To avoid incommoding
reections at visual display workplaces, this device must not
be placed in the direct eld of view.
High gain type screens are not optimal for use with this
projector. The lower the screen gain (i.e., screen gain on the
order of 1), the better the appearance of the projected image.
To Next Page
Loading...
