NEC VT670 - Connecting the Supplied Power Cable

22
2. Installation and Connections
A
C
IN
ZOOM
F
O
CU
S
SE
LECT
L
A
M
P
S
TA
T
U
S
P
O
W
E
R
V
ID
E
O
S
-V
ID
E
OC
O
M
P
U
TE
R
-1
C
O
M
P
U
T
E
R
-2
O
N
/
S
T
A
N
D
B
Y
AUT
O
ADJ.
AUDIO OUT
S-VIDEO IN
COMPUTER 1 IN
COMPUTER OUT
PC CONTROL
AUDIO AUDIO
COMPUTER 2 IN
VIDEO IN
AUDIO
L/MO
NO
R
AUDIO
L/MONO
R
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of
the supplied power cable in the wall outlet.
Make sure that the prongs are fully inserted into
both the AC IN and the wall outlet.
To wall outlet ←
CAUTION:
Do not unplug the power cable from the wall outlet under any one of the following circumstances.
Doing so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector is
turned off.