Disassembly and Reassembly 3-13
8.
Locate and remove the screw securing the CD control board (if installed). Remove the
board from the system.
Removing the CD control board
A
– Screw
B
– CD Control Board
9.
Partially lift the top cover. Disconnect the VersaGlide cable from connector P8 on the I/O
board. Remove the top cover.
Removing the top cover
A
– VersaGlide Cable
VersaGlide
Follow these steps to remove the VersaGlide assembly.
1.
Remove the LCD panel, keyboard, heat plate, and top cover from the system.
To Next Page
Loading...
