NEC VXI Series - CD-ROM Drive

3-14 Disassembly and Reassembly
2.
Turn the top cover over and locate the three screws securing the VersaGlide. Remove the
screws.
Removing the VersaGlide screws
A
– VersaGlide
B
– Screws
3.
Slide the VersaGlide assembly away from the top cover tabs and remove the VersaGlide
from the top cover.
CD-ROM Drive
Use the following steps to remove the CD-ROM drive.
1.
Remove the keyboard.
2.
Remove the screw securing the CD-ROM drive.
3.
Slide the CD-ROM drive out of the system and away from the connector on the main board.
Removing the CD-ROM drive
A
– CD-ROM Drive
B
– Screw Bracket (Screw Removed)