NEC VXI Series - Main Board; Celeron Removal

Disassembly and Reassembly 3-21
Main Board
Follow these steps to remove the main board.
1.
Remove the LCD panel, keyboard, heat plate, top cover, audio board, I/O board, diskette
drive, and Kensington lock latch from the system. Remove any mini-PCI option, if
installed.
2.
Locate and remove the four screws that secure the main board to the base assembly. Use the
needle-nose pliers to remove the three hex screws.
Removing the main board screws
A
– Hex Screw
C
– Main Board
B
– Screw
3.
Lift the main board out of the base assembly.
Celeron Removal
Follow these steps to remove the Celeron CPU.
1.
Remove the LCD panel, keyboard, heat plate, top cover, audio board, I/O board, diskette
drive, Kensington lock latch, and main board from the system.