NEC XN120 - Local LAN (Ethernet) Connection

Local LAN (Ethernet) Connection
4 UserPro Manual
Local LAN (Ethe rnet) Connection
Local LAN (Ethernet) Connection
When connection to the telephone system is made using UserPro via a LAN connection, an IP address and the subnet type
must be assigned to the PC. The IP address and subnet mask are determined by the telephone system in Programs 10-12-01
and 10-12-02.
If the PC is already connected to a network and you are connecting to the NTCPU through a hub or router,
please check with your network manager to determine the IP address that should be used.
The following information is based on a stand-alone PC connected to the telephone system, with the telephone system using
the default settings for the IP address and subnet mask (Program 10-12-01: IP Address 172.16.0.10 / Program 10-12-02: Sub-
net Mask 255.255.0.0).
1. To change the TCP/IP information OF YOUR PC
, click START + SETTINGS + NETWORK CONNECTIONS. The fol-
lowing window appears.
2. Right-click on the LOCAL AREA CONNECTION icon and click on PROPERTIES.
3. In the list of items, click on the INTERNET PROTOCOL (TCP/IP) and then click on PROPERTIES.