Using UserPro - UA level
UserPro Manual 11
Speed Dial
The system has the ability to store up to 2000 speed dials. This page allows for the editing of the system speed dials numbers
and names (Used for keyphone display, directory dialling and clip alpha tagging). In addition, if the ‘Flexible Ringing by
Caller ID’ feature is used this page can be used to route calls amtching the Speed Dial data to the specified destination.
Night Mode Switching (other group)
In addition to the Automatic Night Service Patterns it is possible to manually set system into the required mode. This page
enables the user to select the night service mode, not only for their group, but also for other groups on the system.
To Next Page
Loading...
