NEC XN120 - 4- Connecting the Expansion Units to the EXIFU card

Local LAN (Ethernet) Connection
UserPro Manual 5
4. In the Internet Protocol (TCP/IP) Properties window that appears, click on USE THE FOLLOWING IP ADDRESS button
and enter the following:
IP Address: 172.16.0.11 (172.16.0.12, 172.16.0.13 etc would also be acceptable)
Subnet Mask: 255.255.0.0
5. Click OK and close the INTERNET PROTOCOL window.
6. Click OK and close the LOCAL AREA CONNECTION PROPERTIES window.
7. Close the NETWORK CONNECTIONS window.
Common Buttons within UserPro