To Next Page

To Previous Page

ANPR

5.2.6.2 ACTION: SAVE TO DB

If enabled, this feature allows creating and automatically updating on a remote ftp-server a text file in CSV format

(CSV = Comma Separated Values) containing information about every detected vehicle by the ANPR. See chapter

4.1 for details about connecting the ethernet interface.

Enable: Select YES to enable updating the database with the generated events.

Path Name: Specify the folder name where the database is saved. It is necessary to use

appropriate tags to indicate this folder name. For example, when using %DATE, a

new folder is created each day.

File Name: Specify the name of the database to be updated with the event info. For example

when using %DATE a new file is generated each day. The file name is the date on that

day (e.g.: 2011-07-28.CSV).

Fields: Specify the database fields. For example:

%DATE;%TIME;%PLATE

CSV file contents:

2011-07-28;09-14-44-222;ZLSZ17-NLD

2011-07-28;09-14-44-222;46HVR9-NLD

FTP IP: The ftp-server IP address.

FTP Username: Username of the ftp-server user.

FTP Password: Password of the ftp-server user.

FTP Port: Port number of the ftp- server. Usually port number 21.

FTP Passive Mode: It allows enabling (YES) the passive modality (PASV) for data transferring.

Buffering on SD: In case of network failure and Buffering on SD is enabled, the camera will save all

data regarding the actions. When the network connection is restored, the ANPR will

manage automatically all data stored, freeing the memory. The saving is based over a

circular buffer. In case of full memory the ANPR will overwrite oldest data.

FTP LINK

: Click on this FTP-LINK to directly access the ftp-server. This hyperlink uses the FTP

parameters entered above. This is useful to check whether the ftp-server is operating

properly.

5.2.6.3 ACTION: PULSE OUT

If enabled, activates a digital output for a specified time period. See chapter 4.4 for details about the digital

outputs.

Enable: Select YES to enable activation the digital output.

Output Number: Number of the digital output to be activated.

Delay Time: Delay (in milliseconds) to be applied prior to the actual activation of the output.

Pulse Time: The time period (in milliseconds) for which the digital output will be activated.

Nedap ANPR User Manual

Questions and Answers: