VP1007-200PM-00 ISO Reader I/O Manual version 0.4 / Page 10
8 Maintenance, cleaning and disposal
Maintenance
No regular maintenance required.
Software update
A VP1007 is equipped with software to activate inputs and outputs, display / push button and a motor
safeguard. This software is called firmware. During manufacturing the firmware is programmed and
ready for use. In case of an update it is possible to download new firmware thru the CAN-bus. In the
Velos system the web browser interface of the VPU (VP8001) is used to handle this. For more details
about downloading new firmware see also the manual of the VPU (VP8001).
Cleaning
A VP1007 must be installed in a suitable housing (V-box) so cleaning of the VP1007 is not required.
Disposal
Discard according to the regulations prevailing at the time of disposal
To Next Page
Loading...
