Steam en
17
programs. ~ "Tested for you in our cooking studio"
on page 40~ "Programmes" on page 23
Steam intensity
Different intensity levels are available when adding
steam:
■ Low
■ Medium
■ High
Suitable heating modes
You can switch on steam assistance for these heating
modes:
■ CircoTherm hot air ‚
■ Top/bottom heating ƒ
■ Circo-roasting ‡
■ Bread-baking …
■ Keeping warm «
Starting
1. Touch the # touch button.
2. Fill the water tank.
3. Set the type of heating and temperature.
4. Touch the Ž touch button to switch on steam
assistance.
5. On the display, swipe to the left or right to select the
steam intensity.
6. Touch the 8 symbol to apply the setting.
7. Touch the # touch button.
The appliance starts the operation.
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank.
Cancelling steam addition
1. Touch the Ž touch button to cancel the addition of
steam early.
2. Touch the set added steam in the bottom line.
3. On the display, swipe to the left or right to select
"Off".
4. Touch the 8 symbol to apply the setting.
Note: The operation continues without adding steam.
Cancelling appliance operation
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Dough proving setting
Dough will prove considerably more quickly using the
"Dough proving Œ" heating mode than at room
temperature and does not dry out.
There are two levels available for the Dough proving
setting. Use the information in the tables to select the
appropriate level. ~ "Tested for you in our cooking
studio" on page 40
Note: If the water tank runs dry during operation with
the Dough proving setting, operation is interrupted. Fill
the water tank.
Starting
1. Touch the # touch button.
2. Fill the water tank.
Note: Only switch on the Dough proving setting
once the cooking compartment has completely
cooled down (to room temperature).
3. Swipe to the left or right to select "Dough proving".
4. Touch "1" in the bottom line.
5. Swipe to the left or right to select the required level.
6. Touch the 8 symbol to apply the setting.
7. Touch "+" in the bottom line.
8. Swipe to the left or right to select the required
duration.
9. Touch the 8 symbol to apply the setting.
10. Touch the # touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
Cancelling
Press and hold the # touch button until the appliance
operation is cancelled.
Finishing
Touch the # touch button to switch the appliance off.
Reheating
With the "Reheat ¨" heating mode, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note: If the water tank runs dry during operation with
the Reheat setting, operation is interrupted. Fill the
water tank.
Starting
1. Touch the # touch button.
2. Fill the water tank.
3. Swipe to the left or right to select "Reheat ¨".
4. Touch the temperature in the bottom line.
5. Swipe to the left or right to select the required
temperature.
6. Touch the 8 symbol to apply the setting.
7. Touch "+" in the bottom line.
8. Swipe to the left or right to select the required
duration.
9. Touch the 8 symbol to apply the setting.
10. Touch the # touch button.
The appliance starts the operation.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
To Next Page
Loading...
Need help?
General
