Nelson Nelweld 6000 - Process Monitoring Kit: Tech Install; Diagnostic Kit: Tech Install; Calibration Kit: Tech Install

Nelweld Operations and Service Manual
- 40 -
Software to be installed on the user’s personal
computer.
4.8.7 Process Monitoring Kit: Tech Install
The Process Monitoring Kit allows the use of a
personal computer or laptop to keep track of
preset and actual weld parameters to meet QS-
9000 and ISO 9000 requirements. The kit
includes Nelware Process Monitoring Software to
be installed on the user’s computer.
4.8.8 Diagnostic Kit: Tech Install
This kit allows the use of a personal computer to
setup and troubleshoot the Nelweld unit for more
demanding applications. The kit includes
Nelware Diagnostic Software to be installed on
the user’s computer.
4.8.9 Calibration Kit: Tech Install
This kit allows the use of a personal computer for
calibration of the power source. The kit includes
Nelware Calibration Software to be installed on
the user’s computer, and other hardware.
PC Requirements
Component Minimum
Processor
200 MHz
RAM 32 MB
Video 800 x 600 VGA
Operating System Windows 95/98/NT 4.0